Belt-weighers / Weigh feeders |
Type 'BW 10' Belt-weigher
The robust maintenance-free feed belt-weigher for your conveyor belt assembly.
The BW 10 belt-weigher consists of a robust angle steel frame; The shallow, modular construction of this allows it to be integrated into nearly every existing conveyor belt system. The accurate readings recorder is protected by a mechanical overload limit stop from shock loads. Because of the special power flow periodic maintenance is not required.
The flow of extracted material exercises a pressure load on the rolling cradle. This is picked up by the weighing frame and conducted into a high-precision load cell. A converter strengthens the signal on-site and transmits over distances of up to 600 m to the electronic control unit. This standardises the weight signal and links it with the flow speed, which is detected by a robust odometer. The electronic control simultaneously displays the flow rate (t/h) and the absolute quantity. There are 4 counters and various outputs available.
Technical data
| Sensor | Full bridge DMS sensor | |
| Power Supply | 10 VDC | |
| combiner error | 0.03 % | |
| Sensor protection class | IP 68 | |
| Material | stainless steel | |
| Weighing frame | ||
| Material | steel / powder-coated | |
| Overload safety | 3 times nominal load | |
| Operating temperature range | -20° C to 50° C | |
| Typical systems error | 1 % | |
For further information please see our data sheet
Advantages
- simple installation
- maintenance-free
- short delivery time
- low total height
- integral transport and overload protection